Satlink WS-6936 DVB-S&T Combo Instrument with Spectrum Analyzer

Satlink WS-6936 DVB-S&T Combo Instrument with Spectrum Analyzer Description

For the first time in a economical digital meter, you are now able to view the actual channel on the screen of the meter. Now you can quickly and accurately align the satellite AND you can instantly check the stability of the channel right on the screen of the meter. Transponders, Frequency, Symbol Rate, Polarity, and other settings can be modified by the user. There is never a need to send your meter in for a upgrade.

Meter never needs to be returned for re-calibration due to the unique calibration system built in to the meter. Each time the meter boots up it automatically calibrates for optimum performance so you can align each install with confidence.

DVB-T:

*Frequency Range: 46MHz-862MHz
*Level range:40dBμV-110dBμV
*Input Impedance:75Ω
*Multichannel check
*Demodulation:QPSK,16QAM,64QAM
*Measurement Type: signal strength,quality; MER; S/N;PWR
*Search Mode: Auto,Manual
*ANT Power Supply:5V/12V/24V

DVB-S:

*Input Frequency 950～2150MHz
*Input Level -65～ -25dBm
*Input Impedance 75Ω
*Constellation analyzer
*Spectrum analyzer
*Support DISEQC 1.0,1.1,1.2 and 22khz Tone
*Measurement Type: signal strength,quality; BER; S/N;PWR
*Search Mode: Auto,Blind,Manual
*LNB Power Supply:18/13V(IMax 400mA)

OTHER:

8 menu languages: English, German, French, Portuguese, Spanish, Italian, Czech, Greek
8.4V/3000mAH POWER Lion battery for real long working-time
4.3" / 11cm Color LCD 16:9
Keypad with blue Backlight
Flashlight function (push F1 button for 3 sec)
Power adapter input: AC 90V-240V/50Hz
Power adapter output: DC 12V/1.5A
Working time:4-6 hours (full charge)
Charging time: 5 hours from flat
Car charger supplied
Dimension: 210 X 120 X 45mm
Net weight: 0,5kg

Included in delivery: WS-6936 DVB-T Antenne with Magnet Foot yellow Protective rubber cover large nylon carry bag with shoulder strap 220V charging adapter 12V car charger A / V Cable Adapter 3.5 jack to 3x RCA jack User manual in English
SAT
	Main Menu following sub-menu items can be selected: DVB-S DVB-T Spectrum Analyzer SAT Spectrum Analyzer DVB-T Multimedia System Setup
	Fast-Search Quick Search in the menu item you can select a desired satellite to search. 43 satellites are pre-programmed. The satellite list can be edited with a special computer program and are then loaded with a USB memory stick to the device.
	Quick Search / satellite selection A variety of satellites are preprogrammed and are already in the database.
	Satellite Scan: After selecting the desired satellite you get into the search mode. The following measured values are displayed: Satellite position in degrees Elevation angle in degrees LNB tilt angle in degrees signal strength as bars and as a percentage Signal quality as a bar and a percentage BER / BER Signal strength in dBmV (selection in the system: dBm, dBmV, dBmV) S / N Signal to Noise Ratio In this menu item to control is a transponder scan may be performed. Then can be displayed after leaving the satellite search the channels found in picture and sound.
	Zoom-Function By switching in the satellite search, the measured values are shown as large decimal numbers. The reading of signal strength and signal quality is now possible even from a distance without any problems.
	DISEQC 1.0/1.1 PHere you can set the DiSEqC settings and store for up to 4 satellite DiSEqC ports.
	DiSEqC motor control: After selecting a satellite, you can gradually control a DiSEqC motor or with goto-X to a desired point. The signal strength and quality appears.
	Transponder Administration Here you can add or delete transponders, and editing. The frequency, symbol rate and polarization can be chosen freely.
	Frequency - Spectrumanalyzer Here you can analyze the received signal. Subtle changes are presented visually.
	TV Picture After leaving the menus you get into the TV-Bodus. It is presented in picture and sound. The aspect ratio can be switched in the system (4:3 / 16:9)
	Program Informations: Press the INFO button, opens the program information window. All program information is displayed. Furthermore, this information also to windo image signal control purposes.
	System - Setup: The system allows the following settings: OSD language Enter the longitude Enter the latitude TV Aspect Ratio Measured values (dBm, dBmV or dBmV) time zone Software update Reset to factory settings Display the software version
DVB-T
	Quick-Find In the Quick Find menu to select a transponder for search. Select the country, the desired channel and the bandwidth. In addition, can be turned on the power supply for active antennas.
	Channel Scan If a signal is received so the following measured values are displayed: Signal strength "S" as a percentage and as a bar Signal Quality "Q" as a percentage and as a bar Bit Error Rate "Ber" Signal to Noise Ratio "S/N" in dB ***Now also with dBm, dBmV or dBµV Measurements!*** Be carried out to control a channel search. Then can be displayed after exiting the channels found in the search image and sound.
	Zoom-Function By switching in the Quick Seach , the measured values are shown as large decimal numbers. The reading of signal strength and signal quality is now possible even from a distance without any problems.
	Channel-Scan
	Freq-Checking It is possible to measure five channels simultaneously and the measured values simultaneously display.
	Frequency - Spectrumanalyzer Here you can analyze the received signal. Subtle changes are presented visually.
	TV Picture After leaving the menus you get into the TV-Bodus. It is presented in picture and sound. The aspect ratio can be switched in the system (4:3 / 16:9)
	Program Informations: Press the INFO button, opens the program information window. All program information is displayed. Furthermore, this information also to windo image signal control purposes.